HangCZPT DEJIA Instruments CO., LTD.
Model: DEJIA
Item: HYDRO SLEEVE
CZPT: Sure
Software:
Clamping sleeve for centric, perform free clamping of instruments and cutterheads.
Machine:
Machines with high precision spindles e.g. moulders etc.
CZPT data:
Hydro-Duo open clamping program, activation of hydro clamping by a grease gun. Suited for appropriate and left hand rotation.
| D | BO | NL | L | DB |
| 60 | forty five | sixty | one hundred | 122 |
| sixty | fifty | 63 | 100 | 122 |
| 70 | 60 | 43 | eighty | one hundred thirty |
Instrument clamping systems are the interface among resource and device. They have an adaptor on the tool side and a mounting sleeve on the device
side. The jobs of the instrument clamping system falls beneath a few heading cate- gories:
Torque transmission
The slicing forces have to be received with enough security, the tool should not spin.
Centring
The greater a tool is centred on the machine spindle, the much better the concentricity and balance quality.
Replacing tools
The tooling occasions are shortened by straightforward and rapidly device substitution.
Automated resource substitute is required for flexible creation.
The most basic type of instrument clamping is a shank/hub relationship. The tool is centred by implies of a described clearance in shape between tool bore and machi- ne spindle. Positive suit elements such as feather keys or push pins transmit the torque. They are clamped by nuts at the shank finish. Illustrations are drilling tools or flanged bushes for motor spindles with splined shank or cylindrical spindles of planing and finger jointing devices. This variety of tool clamping has 2 important down sides:
1. The instruments are not centred totally free of play. The centre of gravity is offset by the tolerance, with a negative influence on concentricity and harmony good quality.
2. If many equipment are clamped aspect by side or on leading of each and every other, the axial run out tolerance of the bodies will increase. If the human body faces are not para-lel. When implementing axial pressure at the finish of the shank, the spindle maybend ensuing in an increased imbalance and loading to the bearings.
