Tk Series Synchronous Motor for Drive Compressors and Pumps Tk4500-16 2600 4500kw 10kv IP20

Tk Series Synchronous Motor for Drive Compressors and Pumps Tk4500-16 2600 4500kw 10kv IP20

I. Overview
The large 3-period synchronous motor for TK series air compressor is a high-overall performance series product specially made and designed by our organization for the load of air compressor.
This collection of motors adopts new technology, new supplies, new procedures, exquisite substance selection, and sophisticated producing. It has the attributes of modest size, light-weight bodyweight, stunning look, large effectiveness, minimal sound, minimal vibration, safe and trustworthy operation, and practical use and servicing.
two. Implementation standards
GB755 Rotating Motor Rating and Functionality
Classification of GB/T997 rotary motor construction type, installation sort and junction box placement (IM code)
GB/T1571 3-phase synchronous motor check strategy
GB/T1993 Rotating Equipment Cooling Method
GB/T4942.1 Security class (IP) classification of the overall structure of rotating electrical equipment
GB/T10068 The measurement, analysis and limit of mechanical vibration with a shaft center peak of 56mm and previously mentioned
GB/T10069 Rotating Equipment Sounds Measurement Technique and Restrict
JB/T8667.one CZPT Problems of Big Three-period Synchronous Motor Part one: TK Sequence

3. Fundamental specialized parameters
Power variety: 250~10000KW
Rated voltage: 6000, 10000V
Rated pace: 250, 273, 300, 333, 375, 428, five hundred, 600r/min
Rated frequency: 50HZ
Protection amount: IP00, IP20, IP23, IP44
Insulation course: F
Quota: SI
Cooling technique: IC01, IC37, IC81W
Installation technique: IM7311, IM5710, IM7312, IM7315
*Can be made in accordance to other parameters in accordance to person needs
Four, technical attributes

four.one The structural design is affordable, protected and trustworthy, and the capability to step out of stage is strong.
four.2 The main insulation construction using new insulating materials has higher voltage resistance and long motor daily life.
4.3 The temperature increase margin is large. The motor adopts F-course insulation, and the temperature increase is assessed according to the temperature increase restrict of the B pole insulation.
four.4 The safety device is superior and full.
four.one.1 The stator windings and bearings are outfitted with temperature detection units, which can detect, alarm and trip.
four.four.2 Shutdown place heater with anti-condensation effect.
4.5 Big inertia. Motors with various times of inertia can be made according to person needs.
5, composition sort

five.one The total framework of this collection of motors is welded with steel plates for the frame, finish protect, and base plate. The motor is an independent cavity, and the slip ring can be made with diverse security levels in accordance to user specifications.
5.2 Stator: The stator frame is welded by metal plate. The motor stator outlet is led out by a higher-voltage rubber cable. The outlet place can be led out from the decrease part of the base or from the major junction box on the facet of the motor.
The stator core is superimposed by lower-decline silicon steel sheets, and the main sections are divided by radial air flow ducts.
The stator winding is F grade insulation, and the temperature increase is assessed according to B quality to support increase the services life. It adopts VPI overall dipping paint therapy, which has high electrical performance, mechanical energy, insulation functionality, humidity resistance and thermal security.
five.three The rotor magnetic pole core is created of laminated steel plates, and has distinct constructions this sort of as magnetic pole screws and T tails. The rotor bracket has ventilation holes and is equipped with a admirer, which can well handle the temperature rise of the rotor.
five.4 Adopt seat variety spherical sliding bearing. The bearings are insulated to prevent shaft currents.
Use new lubricating oil and thin-walled bearing alloy tiles, and set electromagnetic centerline indications.
5.five According to user requirements, the slip ring can be made as a good stress ventilation framework to enhance the protection of the motor. The whole length of the motor with the positive force air flow composition of the slip ring is slightly increased.
six. Problems of Use
six.1 Voltage fluctuation: ±5% (It can operate below ±10% below the problems of 7.3 in GB755)
six.2 Frequency fluctuation: ±2%
6.three The altitude does not exceed 1000m
six.4 The optimum ambient temperature does not exceed +40ºC, and the minimal is 0ºC.
7, model description
 TK1250-sixteen/2150

Outer diameter of stator punch (Φ2150mm)

Amount of poles (sixteen poles)

Rated electrical power (1250KW)
3-stage synchronous motor for compressor
eight. Ordering recommendations
8.1 Before positioning an order, you should refer to the merchandise catalog of this collection to explain the necessary merchandise product, technical specs and other data. If there is a discrepancy among the specifications and the samples, remember to get in touch with our firm.
eight.two The motor model, rated energy, synchronous pace, rated voltage, rated frequency, defense level, instant of inertia, rotation direction, installation kind, and many others. need to be indicated when purchasing.
eight.three The sample technological data sheet only lists the related data of motors with rated voltages of 6KV and 10KV. If customers require other voltage ranges, our business can also supply pertinent technical info when buying.
8.four The complex info and proportions in the sample are only for reference when the consumer selects the product. The formal information will be offered by the business soon after the contract or complex settlement is signed.
8.5 If there are any other particular requirements, remember to offer the specifications and signal the relevant technological agreement when purchasing.

Tk Series Synchronous Motor for Drive Compressors and Pumps Tk4500-16 2600 4500kw 10kv IP20